collective|four

Configurations

2008-08-09T15:19:00.000-07:00

The Planter Bike Rack comes in a variety of configurations, depending on the actual bike parking needs of any given area with units stacking back to back in particularly dense areas. And since each pole locks into a separate receiving hole in the bottom of the concrete portion, a bench can be swapped out for two of the poles using the same bend geometry.

The Planter Rack

2008-08-09T14:44:00.000-07:00

Here's our entry, the Planter Bike Rack. This first image shows two units back to back, with space for up to 12 bikes (fourteen if you crammed them in). The whole unit is comprised of several pieces: a concrete planter, with a thick lip for bikers and pedestrians to balance a bag on (one of the behaviors that came up from our research) and steel bent tube bars. The triangular loop on the end can engage several different points on a bike, providing security.

Cityracks competiton

2008-08-09T14:16:00.000-07:00

We wanted to expand the scope of our furniture design beyond the home and entered the recent CityRacks competition. We sought to engage the entire city in the design of a new bike rack. We researched the behaviors of cyclists and everyday pedestrians to come up with a hybrid bike rack system that provides customizable bike parking and seating areas. In keeping with New York's PlaNYC and the One Million Trees initiative, we incorporated a planter for local greenery. See the images below for some of the thinking behind the rack.

Finished bench

2008-02-01T14:16:00.001-08:00

Work work work

2008-02-01T14:02:00.000-08:00

After a whole lot of sawing and sanding and and bolting, we put this little guy together. The work itself didn't take all that long, which was a refreshing change from the shelves we did previously. After making sure everything would fit together, we were ready to head up to Harlem to install the piece.

Reclaiming the wood

2008-02-01T12:55:00.000-08:00

We got the wood (which used to be a factory beam) from Build It Green. Doesn't look like much yet, but was beautiful after we planed it down.

Bench work pics

2008-02-01T12:52:00.000-08:00

As you all may know, we've been working on a bench for David and Alysia. We had some issues with the fabrication of the legs but now it's finally done. Over the next couple of posts we'll run through the construction of the bench!

More press

2007-12-24T12:02:00.000-08:00

The nytimes did an article on Alysia and David's house and green construction as a whole and we got a mention for the office!
here it is

Pic from The Nest

2007-10-12T08:19:00.001-07:00

Thanks for the pics Caitlin

The Nest

2007-09-29T21:18:00.000-07:00

The Nest magazine did a multi-page spread on the Harlem House in their latest issue, with our work in the office prominently featured. Thanks for the shout-out Alysia!

Final Bench design

2007-09-29T21:16:00.001-07:00

Here's a quick CAD view of the final bench design, complete with AutoCAD Siting Woman and Strutting Man

real world strikes again

2007-09-21T19:20:00.000-07:00

The past few weeks have been rather hectic for all of us. Those of us still in school (everyone except for David) had classes start up again, so our free time got drastically reduced. We're almost to the finish line on the bench for David and Alysia. We hit a little snag in the form of a budget cap that doesn't allow for the metal legs we had wanted to use. Didn't realize how expensive that sort of thing would be. We sketched out some wood leg alternatives but we all think the metal is much better, so we're going to eat that cost. Lesson learned: make sure to nail down a budget before going beyond initial concepts.
We've also been contacted with more furniture requests by several other people that we met at various Green Drinks or simply found us on flickr. We'll keep updating the blog as these new opportunities progress.

Feeds

2007-08-19T20:23:00.000-07:00

We just enabled feeds for the blog, so now you can find us in your nifty little RSS readers. Our apologies for not enabling that earlier.

Methodology

2007-08-19T20:02:00.000-07:00

With this project we're going to be going into a bit more depth on our motivations and more behind the scenes aspects of our design process. We're (almost) all still students so this is somewhat new for us. Just to let y'all know...
In the last project we tried to come up with concepts together before presenting them to the clients. We found that this method just took too long and quite possibly suppressed some good ideas since it was hard to get everyone to agree and sign off on each idea. This time we're all coming up with concepts completely individually and then bringing them together for some internal discussion, editing and refinement. This keeps us out of each other's hair while brainstorming so we can give the clients as many possible directions as possible.
In terms of format, some of the drawings were originally done in Illustrator, some on paper and some in AutoCAD, with our resident AutoCAD master Kris putting them all together. We wanted to avoid confusion and let the designs all speak for themselves, rather than one on paper suffering because it possibly wasn't seen to be as polished as one on the computer. Of course the first round of drawings were done on paper. We can get more ideas out there much more quickly that way.

Moving forward on the bench

2007-08-19T19:39:00.000-07:00

After seeing all our sketches David and Alysia chose the angled plane one with the "stalks" for hanging hats and gloves. Next step was to refine that one a bit and give them some more options on how to take it further. We broke it up between the three of us (Joe and Tiffany are off in Copenhagen) and each took a different direction. Simon focused on a shorter design, Kris played with angles and some crazy legs while David took a more linear approach using Tatami mat proportions, which are 1 by 2 rectangles. Check the images below the jump (click for full-size).

Teaser

2007-07-24T21:57:00.000-07:00

Here's a little teaser for our next project, a seating piece for David and Alysia's foyer. More to come soon, we promise.

And the shelves

2007-06-03T21:17:00.001-07:00

More images of the desk

2007-06-03T20:50:00.001-07:00

Dwell Harlem House Opening!

2007-05-21T10:59:00.001-07:00

Here are the final images of the office system custom designed for Dwell's Harlem House. Check here for a walk through the entire house, along with the people who came, and more images of the office!

Office System Installation in Dwell's Harlem house!

2007-05-21T10:45:00.000-07:00

Saturday Night, the night before Dwell's Harlem House opening, we began installing the office system. After the install we filled the shelves with books, rolled the Steelcase chairs into the room, and finally went to sleep.

.....Still Building.....

2007-05-19T22:58:00.000-07:00

Yes, we are still building....not long until the Dwell event in Harlem!!!

Building More!

2007-05-19T22:54:00.000-07:00

Finger joints, drawers, and press releases, what else could you ask for?

Kris in a box! There's a Kris in a box!

2007-05-19T21:41:00.001-07:00

Where did she go?

2007-05-19T20:29:00.001-07:00

We went here...

And picked up a couple of Think chairs.

Relaxed for a bit then trekked them up to the
Harlem House, where David took a well-deserved rest.

Building!

2007-05-15T05:57:00.000-07:00

After about two months we finally started building yesterday! It always feels great to see the project coming together. The next few days are crucial, we have to install the desk and shelves in a couple of days. Tomorrow we are picking up the desk chairs that Steelcase generously donated for the office.

Keep checking back as we are building everyday! Check out Flickr for all building images!

Design options for homeowners

2007-05-15T05:28:00.001-07:00

We have created options for the desk area within the office space. What we have decided on is a desk in which both Alysia and David face the window. Desk drawers are interlocking in the same manner as the shelves. The shelves are designed to 'speak' to the desk by climbing up the wall while also leaning towards the desk. The window sits lower then the desk, here we included a short depth shelf that runs along the window and sweeps along the other wall to meet with the shelves. This shelf is designed to hold small interlocking cubes where David and Alysia's handheld devices can live. Slots are placed on this shelf for wire management. The images above are initial options for both the desk and shelves.

Check out other images at Flickr!

Full Scale Models

2007-05-15T05:27:00.000-07:00

Our full scale models took most of the day to build, as we were still creating options for the homeowners. Materials used for this exercise were found in the rummage bin at school. Hey, we saved money while using unwanted materials, we can't complain. After building the models, we headed over to Harlem to show David and Alysia their options for the desk and shelves. They were very excited, we were even more excited because we had gotten final go ahead on the options given.

Look out for our next few posts including design options, building, and installation! Things are moving faster than ever now!

Slideshow!!

2007-05-13T10:46:00.000-07:00

Embed Slideshow

Jumping In: Initial Desk Concepts

2007-05-12T21:22:00.001-07:00

We had less to go on for the desk area. David and Alysia needed space for their laptops, papers and printer. Other than that it was pretty much open, as far as how the space could be organized. We also started at a totally different point than with the shelves, to give David and Alysia different options of overall concept. We originally (and for a while thereafter) went with a wing-shaped design, trying different tricks to make the most of the limited space and prevent Alysia and David's chairs from bumping into each other. Towards that end, we envisioned an angled work area. We also played with secretary-style rollers as drawers and even as entire legs (with supports of course). Eventually we realized that it was just not going to work. Any legroom gained by angling the work area was lost due to the limits in desk width. After David and Alysia picked the slotted shelf concept and the somewhat-similar-in-look broken up desk concept, we realized that we needed to integrate the two. We also realized that all our clever but not quite functional solutions vis-a-vis leg room could be eliminated if we just put the two of them next to each other. In front of the gigantic beautiful window that they would love to look out of. So we plowed ahead and unified the designs. Next post: full scale cardboard and full speed ahead!

Check out the other concepts on our Flickr!

Jumping In: Initial Shelf Concepts

2007-05-12T12:05:00.000-07:00

David and Alysia, the Harlem House homeowners, sent us images containing about 200 books they own. We jumped right into brainstorming about how we could make a shelving unit that spoke to David's organizational needs while incorporating Alysia's whimsical needs.

Both David and Alysia gravitated towards the concept of slotted rectilinear shapes that lock together, creating a system of organized chaos within the office space. They would pack down into a few sets of concentric shapes, specifically designed for easy moving and storage. Multiple configurations allowed for Alysia's need for variation.

Check out our model making experience on Flickr

Collective | 4 Branding

2007-05-12T11:47:00.000-07:00

Next step for the team was to come up with a logo and business card layout. We wanted something simple, clean and a little bit fun. How can bright green ever not be fun?

Lyptus wood takes on Harlem

2007-05-12T11:38:00.000-07:00

We received amazing news that a supplier of Lyptus wanted to donate their beautiful Brazilian hardwood to us for the home office space. Lyptus wood is a perfect material for this project since it is grown from renewable eucalyptus trees on forest plantations, ensuring environmental safety. Stuart Hanson of Brander Communications generously sent us more Lyptus then expected, 8 sheets of 4' x 8', 3/4" thick, and 4 sheets of 4' x 8', 1/2" thick. The Lyptus is a light cherry shade, which will compliment the redwood, reclaimed from Brooklyn water towers.

Closet Off/ Home Office On

2007-05-12T11:35:00.001-07:00

Everything was going swimmingly until we heard about California Closet's interest in the Building Green in Harlem project. We (of course) still wanted to be involved, and luckily for us homeowners Alysia and David had an office in want of furniture. Instead of the master bedroom closet space, we would be working on the home office, where both Alysia and David would work, pay bills, and read scripts.

Design Task #2: A desk for two as well as shelves for about 200 books, all within an 8' x 10' space with a beautiful large window that overlooks the backyard/garden.

Material Search

2007-05-12T11:26:00.001-07:00

After we established with Alysia and David (Harlem House homeowners) the types of materials they were interested in regarding their closet we began our search. What we found was a variety of reclaimed, sustainable, and innovative materials from local suppliers in the Brooklyn area. We also found an entire section of movie set backdrops, the perfect match for two actors, large display cases, and perforated aluminum .

Closet Ideation

2007-05-12T11:11:00.000-07:00

Here is a quick peek at some of the initial ideas we came up with for the closet space in the master bedroom of the Harlem House.

Check out all of our closet ideas on our Flickr site!

Building Green in Harlem House Project

2007-05-09T07:44:00.000-07:00

We first got in touch with Alysia after hearing about her and David's search for "green closet designers." Being designers (designers-in-training at least) and all having a green-leaning mindset we jumped in with both feet. Here we pause to thank David and Alysia for taking a chance on a group of students. We traveled up to the upper west side to visit their current home, digital cameras and sketchbooks in tow.

Alysia and David's current closet situation was clearly not up to snuff. Clothes were crammed into a, shall we say small space. Stacks of jeans and overflowing hangers and all that. We spoke with Alysia for a while (David was up at the new house, toiling away), finding out what they liked and didn't like about her current closet, and what they wanted in a new one then headed up to Harlem to see the space.

We assume that if you're here, reading about our endeavors then you've seen the videos on Dwell. As nice as the house looks in those videos, construction and all, it's so much nicer in person. And the closet is huge. We continued the discussion with David, showing them both some of our preliminary sketches. And then there was wine. All in all, not a bad First Client Meeting Ever.

Still in high spirits, we were developing our ideas in between work for school. Then we got the call. California Closets was probably signing on, so we were losing our spot. Only we weren't losing a spot in the project. Somehow we had managed to impress David and Alysia with our bright eyed student-ness and they were going to shift us over to the office.

Now this whole process had taken place over a few weeks, including a week of limbo before we were sure that California Closets were definitely in. Which somewhat worked out to our advantage, since we had an opportunity to get some missed schoolwork done. But it cut down on our work time significantly.

We visited the house again as soon as possible, repeating the research and discussion we had previously done. The new office was a whole room, as opposed to the desk they had previously used. Still, it wasn't that large a room, so none of us wanted to waste any space. We also wanted to continue on a theme developed for the closet, that of combining Alysia's whimsy with David's practicality. Of course we didn't know how we would do that yet.

And that brings us all up to the present. The office design is in the works, with some concepts already posted. We're developing and then finalizing them and going full-scale later on in the week. Then it's time to do it for real.